Footrest / Stand - 310x250mm (Printed on Small Printers)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Honeycomb design footrest or laptop stand. Printed in multiple parts on every printer.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 43
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Originally designed as a footrest but came out pretty great for an angled stand as well.
I have uploaded the step files as well for anyone interested in designing bigger version or attachments.
There are 2 versions included, one with full parts for large bed sizes and one with multiple parts for smaller printers.
Dimensions:
310x250mm
12 degree angle
90mm Height Front
140mm Height Back
Hardware:
One Part Design:
(12x) M3x5x4 Heat Inserts AB012
(12x) M3x20 Screws
Multi Part Design:
(44x) M3x5x4 Heat Inserts AB012
(44x) M3x12 Screws
(12x) M3x20 Screws
Multi Part Design for small beds like A1 Mini (180x180mm):
The Legs can be printed on an angle to fit the bed.
The Top is designed by 4 identical small parts that can be assembled together.
You can screws multiple of them together using Heat Inserts and Screws on the sides of the Legs.
Heat Inserts:
Heat Inserts (AB012) must be added to the dedicated spots on the outer perimeter of the part when it is facing up, as shown in the picture.
Assembly Video:
