Surface-Mounted Adapter Schneider Electric ASFORA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
custom-designed surface-mounted adapter for Schneider Electric ASFORA
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
As I was renovating, I accidently bought flush mounted switches. I considered returning them but all the surface mounted were either ugly or very expensive. I decided that i could just print it.
Unfortantly, the brand I bought was not standard Gira 55 so I had to break out Blender and modelise it too.
I, therefore, present you my custom-designed surface-mounted adapter for Schneider Electric ASFORA series, allowing you to install ASFORA switches and sockets on walls without the need for flush mounting.
Note: I use m3x4.2mm copper inserts and m3 screws for holding the switch to the casing.
Notes:
This is a third-party, independently designed accessory and is not an official Schneider Electric product
Designed for standard ASFORA series modules; please verify compatibility before installation
Electrical installation should be performed according to local regulations and by a qualified professional if required - use at your own risk.