Surface-Mounted Adapter Schneider Electric ASFORA
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
custom-designed surface-mounted adapter for Schneider Electric ASFORA
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
As I was renovating, I accidently bought flush mounted switches. I considered returning them but all the surface mounted were either ugly or very expensive. I decided that i could just print it.
Unfortantly, the brand I bought was not standard Gira 55 so I had to break out Blender and modelise it too.
I, therefore, present you my custom-designed surface-mounted adapter for Schneider Electric ASFORA series, allowing you to install ASFORA switches and sockets on walls without the need for flush mounting.
Note: I use m3x4.2mm copper inserts and m3 screws for holding the switch to the casing.
Notes:
This is a third-party, independently designed accessory and is not an official Schneider Electric product
Designed for standard ASFORA series modules; please verify compatibility before installation
Electrical installation should be performed according to local regulations and by a qualified professional if required - use at your own risk.