1 / 8
Ukulele Repair Parts (Tuner Bushings + Bridge Saddle, Snap-Fit, Tested) — zdjęcie 1
1 / 8

Ukulele Repair Parts (Tuner Bushings + Bridge Saddle, Snap-Fit, Tested)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Functional replacement parts for my 1st ukulele, combining snap-fit design, iterative prototyping, accurate 3D printing.

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Public Domain

I designed and 3D printed replacement parts for my first ukulele:
- tuner bushings (snap-fit)
- bridge saddle (custom shaped)

One of the original bushing was missing, and the saddle was damaged, so I recreated both parts using Fusion 360.

This was my first functional project, focusing on:
- dimensional accuracy
- snap-fit tolerance
- clean surface finish

After several iterations (V1 → V4), I found that a +0.25 mm offset on the inner diameter gives a perfect snap-fit on my setup.

The bridge saddle was successfully printed in a single iteration and closely matches the original curved shape.

Printed on a Prusa MK4S printer using PLA.

Note: This ukulele has a damaged neck and cannot hold full string tension anymore, so this repair is mainly for light use / restoration.

Tagi