AMS Lite to Ikea Hejne adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanna mount your AMS Lite onto the side of your Hejne like the crazy 3D maker that you are?
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
You want maximum SHAKE SHAKE SHAKE for your 3D prints?
Then Ikea Hejne are the shelves for you!
Wanna make it really narrow to get to the front of your printer to get them in there tightly packed and make your life even harder?
Then mounting your AMS Lite vertically on a shelf post is for you!
You'll probably need some bolts. I used M5x45, but just jam anything in there that fits. You might also wanna consider extensions for your PTFE tubing and AMS wire if it doesn't reach quite that far.
Licence applied as per file remixed the AMS Lite fitting from.