T-shirt Print - Porsche 911
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
T-shirt print model featuring a Porsche 911.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 149
- Wydruki
- 1
- Wyświetlenia
- 627
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
T-shirt print model featuring a Porsche 911.
With this model you can create your own custom T-shirt print that will be durable.
The print can be made using TPU or PLA.
Instructions
Print the model using the settings provided in the file.
Carefully remove it from the print bed (the model is thin and can be easily damaged).
Prepare the T-shirt on an ironing board and heat up the iron.
Set the iron to a medium temperature.Place the model in the desired position and cover it with heat-resistant paper (e.g., baking paper).
Using the hot iron, gently press or iron the model (not too hard) for about 20 seconds.
⚠ Warning: Pressing too hard or using too high an iron temperature may damage the model.
Wait a moment for the print to cool down slightly, then remove the paper.
If the print slightly lifts from the fabric after cooling, place the paper back on top and press again for another 5–8 seconds.
Remember not to wash the T-shirt at high temperatures (above 50°C), as the print may detach from the fabric.
It is recommended to print the model using TPU. It is more durable and looks better.
If you don’t have TPU, PLA will also work.
Recommended Settings
0.12 mm layer
Detect thin wall