Mini Vases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little vases with various designs.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 273
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
Mini vases with different patterns. You can scale them in the slicer to get the dimensions you want!
Recommended print settings:
- USE VASE MODE (no water leakage, filament waste reduced by ~80%)
- ACTIVATE SMOOTH SPIRAL
- When using vase mode, make sure to activate print by object (or else it will not work)
- When using print by object, the slicing program will likely not let you slice because objects are too close/ too high, but on a 256x256x256 bed you should be able to fit all 3 vases a the same time
- 5 bottom layers
-Line width 0.8mm (works on 0.4mm nozzle)
-Set the flow to 102%
-PETG is better as it is more durable, but PLA should work aswell pretty wel
-For PETG set the part cooling fan after the first 4 layers to 40-50%, while on PLA set it to 90-100%