Refrigerator sliding bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement of the rails on the refrigerator between the front panel and the refrigerator door
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
In built-in refrigerators installed in cabinetry, a sliding bearing is required to connect the decorative front panel to the refrigerator door and to compensate for the offset between the two components during opening. In many conventional designs, these parts appear to be undersized and tend to fail quickly at the rail lip.
This model is intended to address that issue. It has been tested in a household with three children, where the refrigerator is sometimes opened abruptly.
Print Settings:
Printer: Prusa Core ONE
Material: PLA
Nozzle: 0.4 mm
Layer height: 0.2 mm
Infill: 30%