Jonsbo D32 Pro Case Back Filter Brackets And Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets for holding a filter on the back of a Jonsbo D32 Pro PC Case + Frame for crafting that filter if necessary
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Jonsbo D32 case is a really cool and compact case, but its small dimensions pushes the user to find different air cooling paths. One of these paths sees a back intake and top exhaust but the case lacks both a back filter and a predisposition for it.
These brackets lets you easily place and remove a custom filter that you can craft by cutting a mesh filter. In the files is included a frame that you can print two times that lets you "sandwich" and glueing the filter between them, in case you have a mesh filter without rigid borders.
The brackets go in preexistent holes in the case, you just have to reuse the screw it's already in or another screw that came with the case.
INSTRUCTIONS
Bracket 1: Remove the screw that holds the Motherboard mask, place the guide on the block, insert the same screw again.
Bracket 2: Take another screw, place the bracket on the lower sliding cage, insert the screw.
Bracket 3: Take another screw, place it inside the case in the back panel pointing outward, place the bracket on the outside of the case, insert the screw on the bracket.
Frame (optional, for flexible mesh filters): Print two of these, lay a flexible mesh filter on one of them, cut it to shape, glue it, place the second frame on it.