Robotic gripper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cheap, 3d printed gripper for robotic applications with integrated electronics and ROS communication.
- Ocena
- 5 / 5
- Polubienia
- 108
- Pobrania
- 982
- Wydruki
- 1
- Wyświetlenia
- 6844
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D printed powerful gripper mainly designed as a cheap tool for UR3e robot, however, because of the simple mounting system - you can adapt it to any robot.
Printing instructions:
The project can be printed with any material you like, just keep in mind you need to use supports in some places(check .3mfs). I created a prototype with PLA(only rubber socks with TPU - remember to use fuzzy skin for better grip!). Some parts require you to unblock holes from a built-in supports - use a drill.
Other important informations:
Build guide, BOM, and other useful informations can be found on project page: https://github.com/Evroc/Robotic-gripper
however, to make it easier:
Build guide: https://1drv.ms/p/s!AmhhxRqSkzTrhK5689f8yG8gnyS89Q?e=EBmXII
Build guide(PDF): https://github.com/Evroc/Robotic-gripper/blob/main/Build_guide/GripperBuildGuide_v1.0.pdf
BOM: https://github.com/Evroc/Robotic-gripper/blob/main/Gripper/BOM/GripperBOM.xlsx
Looking forward to see your grippers :) good luck and have fun!