Toothbrush Cap and Q-tip container for travelling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are practical prints when travelling, consisting of 2 different types of toothbrush caps and a q-tip container!
- Ocena
- 4 / 5
- Polubienia
- 3
- Pobrania
- 66
- Wydruki
- 2
- Wyświetlenia
- 200
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
3D printable useful containers when travelling! The cap features a snap-fit mechanism that holds the toothbrush securely inside while also not being too hard to open. There are 2 cap variants:
-The filament hinge version (the one with the small drainage holes in the corner
-The print in place hinge version (the one that has the more open design on the drainage holes)
The Q-tip container has an elegant rib design on the exterior and is secured by 3d printed threads, making for a satisfying and practical print.
Recommended print settings:
-0.16 layer height (0.2 might work but the lower the better)
-4 wall loops
Make sure your printer is well calibrated before starting the print, as even the smallest misalignment or over extrusion/under extrusion can ruin the hinge!