1 / 6
External Shell for Creative Audigy Drive
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Introduction
I've been having this extra Audigy Drive lying around with its internals exposed. So here is a PlayStation 2 themed shell to encase this thing for easier handling and storage.
 |  |
|---|
Printing
Print the pieces with the default orientation. Supports are required for all 3 pieces.
Assembly
This case requires 4x M3x6mm screws to install. Do NOT over-tighten the screws, or you risk cracking the walls.
Lay the back panel onto the back of the drive, then drop them into the bottom case. Then put the top shell over and put on the screws.
Misc
You can use an ordinary IDE cable with the Audigy Drive. Just make sure Pin 1 is oriented correctly as indicated.