External Shell for Creative Audigy Drive
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A set of shell for converting the internal version of the Creative Audigy Drive into an external one.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Introduction
I've been having this extra Audigy Drive lying around with its internals exposed. So here is a PlayStation 2 themed shell to encase this thing for easier handling and storage.
 |  |
|---|
Printing
Print the pieces with the default orientation. Supports are required for all 3 pieces.
Assembly
This case requires 4x M3x6mm screws to install. Do NOT over-tighten the screws, or you risk cracking the walls.
Lay the back panel onto the back of the drive, then drop them into the bottom case. Then put the top shell over and put on the screws.
Misc
You can use an ordinary IDE cable with the Audigy Drive. Just make sure Pin 1 is oriented correctly as indicated.