Airsoft M4 Adapter Mag - Shotgun shell to M4/M16
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Using an airsoft shotgun shell type magazine as the internals to make a user friendly and inexpensive low cap magazine.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
A great option to add some realism or variety to your weekend games without everyone needing to buy a bunch of expensive mags. Buy a bunch of cheaper shotgun shells or use ones you or your buddies already have. With a couple other adapters you can use these with the other popular airsoft gun platforms making them more universal.
Your shotgun shell will dictate the effectiveness of feed!! (You may need to sand down the ID of the o-ring to make it bigger if your shotgun shell isn't pushing bbs through. Roll it onto a pencil and chuck it on a drill to sand it uniformly. Sanding a little flat spot on the outside will allow you to roll it to sand the inside.)
Repost of an excellent concept and wonderful execution. Original posting: M4 Shotgun Shell Adapter by Pjock - Thingiverse
Find more of the creator's work and support financially through the link below.
HI-CAPA SHOTGUNSHELL HPA ADAPTER: https://cults3d.com/en/3d-model/game/hi-capa-shotgunshell-hpa-adapter-pjock
BOM:
O-ring OD 8,5xID5xCS1.5
Stainless Steel Cylindrical Pin M2 x 22 (3) [Can use filament in place of these, melt the end of the piece holding the release to keep it in place.]
Compression Springs in mm: 1 x 15 x 18 WxLxOD
Compression Springs in mm: 0,4 x 5 x 15 (or 10)