Front GPS Mount for Vapor D5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this model in order to move the GPS to the front of the quad instead of installing it to the back.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to put the GPS at the front of the quad in order to separate it as much as possible from the RC antena. I'm using a double frequency receiver (2.4Ghz and 900Mhz - old Gemini receiver) and this receiver model causes interferences with the GPS. So this is just for a test.
If you are using DJI O3, O4 or any digital VTX, there is almost no point in keep using the GoPro holder at the front so I decided to use that location for my Buzzer. At this time I was unable to put both components (Buzzer and GPS) at that place so I'm open for suggestions.