Front GPS Mount for Vapor D5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this model in order to move the GPS to the front of the quad instead of installing it to the back.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I wanted to put the GPS at the front of the quad in order to separate it as much as possible from the RC antena. I'm using a double frequency receiver (2.4Ghz and 900Mhz - old Gemini receiver) and this receiver model causes interferences with the GPS. So this is just for a test.
If you are using DJI O3, O4 or any digital VTX, there is almost no point in keep using the GoPro holder at the front so I decided to use that location for my Buzzer. At this time I was unable to put both components (Buzzer and GPS) at that place so I'm open for suggestions.