52mm Gauge Mounts (4 Variations)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
52mm or 2.047 / 2 3/64 inch Gauge Mounts. Designed for under dash mounting in vintage cars. 4 versions
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
52mm (2.047 or 2 3/64 inch) Gauge Mounts, works for gauges with mounting brackets like the one shown in pictures. designed for under dash mounting in vintage cars, but could work anywhere you need a simple, low profile mount for a gauge.
4 versions ( Left corner mount, Right corner mount, Rounded, and Square) Left corner mount pictured.
I didn't add holes on the mounting surface because I figured peoples needs will vary, so that you can drill where needed, or add them in your slicer.
I would recommend printing in ASA, or something with similar heat tolerance & UV resistance for automotive use.
If feel like this model deserves a tip, you can use the options listed below.
Venmo - @Bgeezy4043
PayPal - @Bgeezy4043