Obscura One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Open Source EPS32 retro camera
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
📸 Obscura One – Open Source Camera
Obscura One is a fully open-source, 3D printable DIY camera with a nostalgic early-2000s digital vibe.
It’s designed to be simple, affordable, and easy to build in just a few hours.
The camera is powered by an ESP32-CAM module and controlled with a single button:
1 click → take a photo
2 clicks → photo with flash
hold → Wi-Fi mode to download images
All parts are easy to source (under ~€30), and the entire enclosure is fully 3D printable.
👉 Full build guide, wiring, firmware, and files on GitHub:
https://github.com/chriko3/ObscuraOne
Recommended settings:
Material: PETG
Layer height: 0.15–0.2 mm
Infill: ~20%
Supports: Required for case and back cover
PETG i used https://amzn.to/4vvWlwI
Note: This is a affiliate link.
The last three pics are photos made with the camera :)