1 / 2
Ender 3 V3 SE Silent Cooling Upgrade – Noctua + 5015 Fan — zdjęcie 1
1 / 2

Ender 3 V3 SE Silent Cooling Upgrade – Noctua + 5015 Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a new way of Ender 3 V3 SE, combining a powerful 5015 fan, a quiet Noctua fan, and an all-in-one modern design!

Ocena
0 / 5
Polubienia
56
Pobrania
203
Wydruki
1
Wyświetlenia
1466
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hello, here is my small tutorial on how to assemble this new printer head

Everything you need:

  • 2x Connector JST 1,25mm

  • 3x M3 x 6mm Countersunk Head

  • 2x M3 x 25mm Countersunk Head

  • 4x M3 x 20mm Hex Socket Head

  • Sunon 5015 fan 24V (this is the one I use -> Sunon MagLev MF50152VX-1L02C-A99)

  • NF-A4x10 24V PWM

  • M3 thread tap

I highly recommend using PETG for the Sunon fan shroud and the Noctua holder. The main cover can be printed from PLA for better results.

The parts have been optimized for easy to print. All components can be printed without supports, using a 0.15 mm layer height.

Here is a small tip for color combinations. ;)

My process for assembling the parts:

  1. Print all parts.

  2. Prepare the holes as shown in the picture with M3 thread tap.

  3. Remove the old cover with the fans.

  4. Cut the connectors from the old fans, or you can use new ones and save the old fans.

  5. Use a multimeter to determine the positive and negative wires, and solder the fans wires correctly according to polarity. Insulate them with heat shrink tubing or tape instead of not leaving them exposed.

  6. Route the fans wires as shown in the picture.

  7. Assemble all the parts of the new printer head.

Now it’s done! Enjoy my new design, and if you encounter any problems or find any mistakes, just write to me.

If you like this model, please leave a like or comment – it helps a lot!

Tagi