Decorative Q-tip Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print and easy to assemble qtip holder. Requires glue for assembly.
- Ocena
- 4,75 / 5
- Polubienia
- 313
- Pobrania
- 1621
- Wydruki
- 29
- Wyświetlenia
- 5798
- Oceny
- 24
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Aesthetically pleasing modern design can be quite expensive so why not print it yourself for less? This model was designed to be as easy to print and assemble as possible with a detailed instruction booklet in PDF form, no supports, and properly oriented STL files.
The only thing you will need to have for this print is some sort of glue.
I have other models with similar designs on my profile if that interests you.
Designed using a 220mmx220mmx300mm print bed.
This model will use a 6.6% of a roll of filament at 15% infill with 2 walls. The total print time at .2mm layer height is 9h 53m or about 0.4 days.
Detailed print and assembly instructions are supplied via a PDF document.