Genimtsu 3030 ProVer foot mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple foot mounts for the 3030 ProVer (and likely the 3018 as well) to be used to mount the CNC into a fixed position
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Just a simple foot mount that will allow you to mount your Genmitsu 3030 ProVer CNC to a fixed location in an enclosure. This will likely also fit the 3018 CNCs as well, but this was designed to work with the 3030. Use a couple M3 wood screws to fix the feet into position once you get the CNC mounted where you want it. These allow you to easily lift and remove the CNC from the fixed location if you need to, but the weight of the CNC itself is more than enough to keep it in the mounts and fixed into place.