Craniumortis - No AMS / Multi-Part Bust
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi-part design that separates the skull, brain, and base so each can be printed in different colors without AMS.
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
Multi-part design that separates the skull, brain, and base so each can be printed in different colors without AMS.
The brain uses deeper ridges to hold detail, and the base is built with larger plate geometry to keep everything clean and consistent once printed. The goal was to keep it easy to print while still having enough surface variation to catch light well.
All parts press together cleanly. No glue or hardware needed.
Print Profile:
Standard settings work well
0.2 layer height recommended
15 to 20 percent infill
3 walls for strength and surface quality
PLA recommended
Slow outer wall speed for cleaner finish
Print parts separately
No AMS required
Press-fit assembly, no glue needed