Canon Pixma IP6600D Disk Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Canon Pixma IP6600D Disk Tray
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Modified from the IP6600D card tray STL. Converted card tray STL into STEP via FreeCAD and imported into F3D to convert it into a disk tray. Used the commonly available DIY template (see https://web.archive.org/web/20071205171504/http://pixma-faq.periastron.com/3.html for more information).
Disk depth is 1mm, should align with the templates specification of 1mm thick cardboard. Modified the 3rd reflector hole to match the others.
You need to place silver tape, glue some foil, or use a metallic chrome reflective paint pen (my choice) to create the reflecting surface inside the 3 square recessed cutouts.
All parts should be printed slowly with a 0.16mm layer height for best results.
My parts are designed with this layer height in mind.
Category: Parts