Canon Pixma IP6600D Disk Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Canon Pixma IP6600D Disk Tray
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Modified from the IP6600D card tray STL. Converted card tray STL into STEP via FreeCAD and imported into F3D to convert it into a disk tray. Used the commonly available DIY template (see https://web.archive.org/web/20071205171504/http://pixma-faq.periastron.com/3.html for more information).
Disk depth is 1mm, should align with the templates specification of 1mm thick cardboard. Modified the 3rd reflector hole to match the others.
You need to place silver tape, glue some foil, or use a metallic chrome reflective paint pen (my choice) to create the reflecting surface inside the 3 square recessed cutouts.
All parts should be printed slowly with a 0.16mm layer height for best results.
My parts are designed with this layer height in mind.
Category: Parts