1 / 5
LowRider Drip Tray for the La Marzocco Linea Mini — zdjęcie 1
1 / 5

LowRider Drip Tray for the La Marzocco Linea Mini

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed more space in combination with the scale

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
190
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Alternative Drip Tray for La Marzocco Linea Mini with reduced height

I’ve been tinkering with an alternative drip tray design for the La Marzocco Linea Mini R to address a comon issue: limited vertical space when using tall cups or pitchers, especially with a scale for brew-by-weight workflows. The stock tray often left me struggling for clearance, and I wanted something more flexible.

Why This Approach?

More headroom: A flat, low-profile design gives extra space for taller vessels.

Flexible scale placement: My first try (a grid with a central dip) kept the scale centered under the portafilter, but that made it awkward to switch between single and double shots. Now, I can slide the scale to the side and place a second cup next to it—no need to fiddle with app settings every time.

I used PC filament for heat resistance, but (for me) it’s tricky to print! 
It started to work for me with glue stick and a brim ... still a bit of warping

You will need:

  • 2x  M3 heat-set inserts

  • 2x M3 screws

  • 2x Round magnets (e.g., 20 mm diameter × 7 mm height)

These components will mimic the original drip tray’s mounting mechanism.

Tagi