LowRider Drip Tray for the La Marzocco Linea Mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed more space in combination with the scale
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Alternative Drip Tray for La Marzocco Linea Mini with reduced height
I’ve been tinkering with an alternative drip tray design for the La Marzocco Linea Mini R to address a comon issue: limited vertical space when using tall cups or pitchers, especially with a scale for brew-by-weight workflows. The stock tray often left me struggling for clearance, and I wanted something more flexible.
Why This Approach?
More headroom: A flat, low-profile design gives extra space for taller vessels.
Flexible scale placement: My first try (a grid with a central dip) kept the scale centered under the portafilter, but that made it awkward to switch between single and double shots. Now, I can slide the scale to the side and place a second cup next to it—no need to fiddle with app settings every time.
I used PC filament for heat resistance, but (for me) it’s tricky to print!
It started to work for me with glue stick and a brim ... still a bit of warping
You will need:
2x M3 heat-set inserts
2x M3 screws
2x Round magnets (e.g., 20 mm diameter × 7 mm height)
These components will mimic the original drip tray’s mounting mechanism.