Wiimote Back Cover V1.1 - with finger hole for easy removal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a fast-printing wiimote back cover with minimal supports, with a window for easy battery replacement
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
A fast printing wiimote back cover with a small window for easy removal without breakage. I also slimmed down the bendy bit, so that, well, it bends more easily.
Print Settings:
- 0.20mm SPEED profile (under 18 mins!!)
- I printed it in PLA Tough (Prime Select brand) so that it has some give, but i think regular PLA should be fine too. PETG would probably be better.
mine turned out quite bad as i could not dial in the print profile correctly, but functionality-wise it works good.
Let me know how it works for you, or if its terrible, or if you found better settings, because I haven't experimented at all with other settings :D