Toyota Yaris (2020-, gen 4, XP210) Storage Tray for Phone and Stuff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage cubby to organize the big storage space in the middle
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is a design I made in order to make use of the center cubby space. I used to put my phone on the tray above, but I never liked how it moved around in tight turns. Sadly, the cubby's available space can only take one phone, not two side-by-side (believe me, I tried). It is made to fit a 2019 and onwards Toyota Yaris (XP210), but should fit a Toyota Yaris Cross as well (will check as soon as possible, but the dash design is identical, so I've got high hopes). The design also features a grid on the back for easier printing in high-warp materials, such as pure ABS/ASA/PA/PC. The phone tray fits 79mm wide phones. In the future, I might design a drawer for the lower cubby space if I find a need for it. Also, maybe a QI charger underneath the bigger phone tray.
Print it as is, in a higher temperature material than simple PLA, no supports needed. The pictures show the design in Polymaker's HT-PLA and, while I don't really trust it for interior automotive environments, it might just work. Takes about 50m of material (160gr in HT-PLA/PETG, 120g in ABS/ASA).
Added a derivative model with a cutout for the 12v socket