Liczymy pasujące modele…
central locking buttons, both lock and unlock button. Inserting buttons require disassembly and insertion inside the battery case. On top of the board
realmente fiz para meu carro e deu certo Category: 3D Printing
Toyota Lexus Screw Cover for Yaris, Auris, Corolla, Rav4 and other models I recommend black material, printed in 100% infill and support only under the long pin.
I share with you a design that I created based on an SVG image that I found online. Enjoy it
Adapter for Toyota Yaris Cross. To install a tweeter in the triangle plastic cover front doors without damaging the original. The design is for the left door. Mirror on the Y axis for the right door. Three versions, one ready to mount the…
I remixed the speaker adapter to use with Toyota Yaris to get a better fit. With this you can even use the original Socket if you can solder 2 cabels. For the Yaris XP13 the left upper hole is 0.6° displaced so I rotated this part a…
New version Oct 2021 No need to remove the headrest when adding/removing the GoPro mount Push the headrest down with slight force until it locks, this holds the mount securely in place You need to get one regular M5 nut for the Gopro…
Front door speaker adapters for Toyota Yaris Facelift MK1 5 door model (2002 - 2005). There is a complete lack of this specific model on the internet, so I thought I'd create it and share. Modeled by measuring the factory speakers and…
Voici un porte clé pour votre Yaris Cross Pour les imprimantes multicolor (ex Bambu lab et AMS) j'ai une nouvelle version du porte clé : https://makerworld.com/en/models/158961#profileId-174465 Here is a key ring for your Yaris CrossFor…
A replacement cap for the 2008 Yaris wiper arms
This is used in the event you are installing some accessory that is being hardwired to the cars interior fuse box. This is a remix of the following link:…
Put padding on top of the sliding armrest and cover with leather or fabric. 2pcs M6 x 40 (max 50) for the hinge 4pcs M4 x 40 for the sliding piece 4pcs 5,3 x 20 washers for the screws holding the sliding piece Outer walls/perimeters: at…
Toyota GR Yaris This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as: wall decoration desk decoration gift for fans Category: Signs & Logos
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x200mm
A simple cover for windscreen wipers since the hail broke them. It could fit other makes, let me know it and share them!
Small Mudflaps for those are only driving on normal Roads
I bought a torque insert to stiffen up engine movement for my GR Corolla. I decided to model it before install since the shape didn't look too complicated. Test print was done with PETG using a 0.8mm nozzle and was cancelled midway…
Upgraded bumper ( https://www.printables.com/model/1277060-rear-bumper-for-tamiya-tt-02-diffusor-for-yaris-ga ) Bigger diffusor for the TT-02 chassie with Yaris body Printed in TPU 95A with 8% honeycomb infill Protects the car and…
Fits all SR20 Heads, although later S15 heads had different sized holes so the Yaris coils don't seat as well. Please print out of carbon fiber nylon or ABS due to temperatures in head. 1 version has cable ties 1 not, i printed 2 of each…
Toyota Yaris P1 Dashboard clip. Replace the OEM yellow clips that fixes the middle dashboard to the car.
Blanking Plate Blanking plate designed for those that hide a wireless CarPlay/AndroidAuto adaptor behind the dash, or relocate the USB port. USB-C Panel Mount Using a wireless CarPlay adaptor that has a power passthrough port? Use this…
My Toyota Yaris 2015 (Mk3) did not come with front fog lights fitted and at first I didn't mind. However, I noticed that under the front of the car the plastic covers are slowly breaking apart. In fact, during one of the trips outside the…
This cowling matches the contours of the steering wheel and look nicer that the barrel style cowling that comes with the wheel spacer. Printed using Prusa ABS 0.2mm layer Solid infill Organic support on build plate only St settings except…
This is the wipers nut cap of a toyota yaris p1 1999. Make it with PETG and not PLA because of UV exposure and temperatures outside
Disclaimer: Using phone holders/stands in a car is prohibited by traffic regulations in some countries. Use on your own risk. Phone width This holder component fits iPhone 13/14 case width about 75.5 ~ 76mm. Slightly scale the holder in…
3 walls, 20%infill, PETG or another material that resists heat better than PLA.
Print on side but with support, i do 100% infill more pictures will follow
Toyota Yaris / Hybrid 2015 - 2019 folding air conditioning panel mask to prevent glare of blue LED light at night Just fold it out and place it over the buttons on the climate control. The dashboard display light can be adjusted, the…
Door Jamb Switch Nipple Boot I designed for a 2007 TOYOTA YARIS (but also might fit TOYOTA ECHO 2000 - 2005 SCION XA 2004 - 2006). Printed with Overture TPU on an Ender 5 Pro. The main nipple is a direct fit replacement for the original…
Dieser Keil gleicht die Schräge in der Mittelablage im neuen Toyota Yaris Modell 2022 aus, sodass man eine Induktionsladestation hineinlegen kann. Eine Aussparung zur Kabelführung ist dabei. Das Kabel dann am besten seitlich zur USB…
Fini les clés et le telephone qui tombe dans les virages
Absurdly simple design. Just a tapered peg with a flat edge for easier printing! Dreadful original clip design, despite very sound bonding of the string into the clip and also a very nicely sewn loop at the other end. Spoilt by stupid…
Replacement Rubber for the Engine Cover
This model uses the swivel part taken out of a sunvisor from a Toyota Yaris 2001. I have cut apart the original and used the part to hold the new one in place in the car. I had to cut off most of the steel wire holding the original…
The GR Yaris rear hatch has a huge amount of play from the factory. These parts are designed to support the hatch and dampen out any vibrations. Use of original bolts and locations means that no drilling or purchasing of new hardware is…
Toyota Yaris 2015 Hybrid Cockpit Fuse Box Cover i made out of PETG for a friend. Print Settings Printer: Sapphire Pro Rafts: No Supports: No Resolution: 0,2 Infill: 30 Filament: Amazon Basic Filament PETG Black Category: Automotive
Badge Holder for Toyota Yaris GR Enthusiasts For Toyota GR 86 aficionados, this badge holder is the perfect companion. 3D printed with a design that celebrates a passion for high performance and elegance, it's the ideal accessory to…
A tray that fits snugly in to the inside of the lift up armrest of the Toyota Yaris Cross. It has slots for £1 /€1 coins or trolley tokens (or smaller coins), as well as a slot for a pen. At 0.2mm layer height print the first 4 layers and…
Steering column mount for the AIM Solo 2 on the GR Yaris. Longer screws required on the steering column plastic panels.
Recently the plastic clips of my Toyota Yaris 2024 gave out, so I decided to reverse engineer them. Searching for them on the secondhand market I was stunned because they didn't sell the clips alone. They are made of a crappy PP blend…
Toyota Yaris Cross GR SPORT Keychain This keychain is inspired by the sporty and versatile Toyota Yaris Cross GR SPORT , combining urban practicality with GR performance styling. Print with a 0.2 mm nozzle for finer detail. Perfect for…
Een waterdrop thermobeker houder voor in de Toyota yaris cross. Gemaakt met petg omdat deze in de auto blijft staan en petg goed tegen warmte kan.
This is a housing for the electronics of the original key for the 1999 yaris and similar models. The parts do not need any support to be printed and are fully customisable. Materials: typical PLA works fine, maybe consider using PETG for…
Replacement for the original cover with the hole for installing the light in the rear seats and do not destroy the original. Updated(30/03/2026) Added Step Files For great finish you can print in resin. Also by mixing resin you can get…
Wanted to add a button to the blank plate, without ruining the original. Made to fit the “Toma Car Parts 40.284 12V 16A” push button switch (EAN: 8715647806183). Also included a blank plate. Dusty Placeholder picture, to indicate location…
Side light covers, with two versions one with a center hole to change the lamps easy, works with transparent and white pls filament, i didnt test with another kind of filament.
This is the wipers nut cap of a toyota yaris p1 1999. Make it with PETG and not PLA because of UV exposure and temperatures outside
Boucle de ceinture de sécurité pour éviter que l'alarme sonne lorsque que vous posez des sacs trop lourd sur le siège passager.
The GR Yaris rear hatch has a huge amount of play from the factory. These parts are designed to support the hatch and dampen out any vibrations. Use of original bolts and locations means that no drilling or purchasing of new hardware is…
A Toyota Yaris GR Keychain Layer height: 0.2 Infil: 6-10% Material: Bambu PLA Support: No Printer: Bambu Lab X1C
Print the yaris.3mf file Has two colors, back color and front color First print the back color then before layer 16 starts (at 0.2mm layers) you change the filament I use the Filament Change plugin from Cura, it stops the print before…
UPDATE : I have reduced the Height of the AIS Mount about 10mm Alternative Air Intake System for Toyota GR Yaris - and maybe the Facelift. https://youtu.be/Gia9_DREhcA With it you will get lower Air Intake Temperatures (CACT) and appr. 16…
Replacement for the original cover with the hole for installing the light in the rear seats and do not destroy the original. Updated(30/03/2026) Added Step Files For great finish you can print in resin. Also by mixing resin you can get…
Printed with TPU 95A 8% honaycomb infill, no supports needed if printed upside down
Wanted to add a button to the blank plate, without ruining the original. Made to fit the “Toma Car Parts 40.284 12V 16A” push button switch (EAN: 8715647806183). Also included a blank plate. Dusty Placeholder picture, to indicate location…
About A flat cover for the center console of Yaris NG Hybrid (tested with 2023 model, might fit others). Our dog enjoys squatting on the center console but sometimes presses the various buttons located there. The cover hides the buttons…
Thanks to Veggysaurus for the shape of the mounting clips on either end, I angled the phone back a bit and rotated it towards the driver (RHD) to make it line up with my line of sight a bit better. Also included a slight recess on the…
A simple Toyota Yaris Cross keychain. Designed with lack of MMU in mind (1 color per layer). Printed with 0.20 mm layer height and I used the “slower” STRUCTURAL profile on my MK4S to achieve a better grille details.
Side light covers, with two versions one with a center hole to change the lamps easy, works with transparent and white pls filament, i didnt test with another kind of filament.
Boucle de ceinture de sécurité pour éviter que l'alarme sonne lorsque que vous posez des sacs trop lourd sur le siège passager.
This is a design I made in order to make use of the center cubby space. I used to put my phone on the tray above, but I never liked how it moved around in tight turns. Sadly, the cubby's available space can only take one phone, not two…
Toyota Yaris Cross door tweeter adapter (Remixed for bigger 53mm tweeters)
Bottle adapter for the Toyota Yaris Y20, created to securely hold bottles with an approximate 80mm diameter. This accessory helps keep your bottle firmly in place while driving, reducing movement during acceleration, braking, and…
This is a longer version designed to keep the cam nearly in the centre of the car. Print in PETG or better. It can get very hot in the car.
Added single port configuration ___ v2 Update Modified to fit head units which come with USB extensions for CarPlay/AndroidAuto. The female end of the USB extension should be 11mm x 19mm. Apply high temperature hot glue, epoxy, or super…
Replacement switch hole cover without the ribs for easy modification. Original Model Number: 55539-52060 Fits Toyota Yaris 2008 Changelog: 10/21/2017 - v2 Increased leg length by .5mm for a better, locking fit Removed warning about…
Printable in Ender 3 Pro when setting the Y print build size to 230mm. The 2 options with "Sony Radio" description are made to tightly fit with a Sony DSX-A416BT 1 DIN car stereo. Other car stereos might also fit. Might also fit other…
The GR Yaris adjustable steering wheel can brake so only the height position can be adjusted. This is due to a small plastic cylinder braking. This is a temporary fix. Print with 5 outer walls. Category: Automotive
Two versions: Cup plus a ring to be printed with flex material Cup without a flex part The version with a flex part keeps especially larger bottles and mugs lower down and works way better with large McDonalds cups for example Category:…
joint to fold rear wiper on Toyota Yaris 1 (1999 - 2005)
The aux cord in the Yaris sticks straight up in the center console leaving it open to damage when things are set on top. This fits in seemlessly using the blank slot next to it and covers the port from damage. I print in two pieces where…
Update from the previous design, with the clip slightly stronger and the two halves fitting together without glue. Printed with PETG for thermal stability, needs supports but prints mostly fine. After carefully cleaning away the support…
Keep your Toyota Yaris clean and organized with this tailor-made 3D-printed trash bin. Designed to fit precisely in the cupholder at the back seat, this bin offers an easy and convenient solution for waste storage on the go. Features and…
SideSilhouette of a Toyota Yaris GR. On request I can also send the basic image to make changes, or if minimal, I can make them myself on request.
Printed with PETG for thermal stability, the two halves are glued together with epoxy. The bottom part needs support around the clip, the top part works better with support around sides. Avoid support in the connecting groove. Complete…
Toyota Yaris Cross Hood Rod Holder and gasket The looseness of the retainer causes it to make noise. This is a complete replacement part made of TPU to eliminate vibrations or just a TPU gasket to put it with the original part Print…
I recommend printing this model upside down, with the Yaris logo on the bed, to achieve a better result.
Cover for the windshield wiper armature of a 2011 Toyota Yaris. Printed at .3mm on an Ender 3. Snaps into place
Cover cap for holes screws behind steering wheel Print settings: 0.2 layer 3 Wall 3 Top 3 Bottom Not supports Best ABS or TPU
Mount your GoPro near your Head to record your race on a Track or Road in 1st Person View. Because of the Heat inside a Car, use at least ABS for better Heat Resistance
