Mouse Under Desk Holder/Mount/Brackets (Remix'ish)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based upon a keyboard mount, modified to hold a mouse measuring (max) H-54mm, L-130mm, W-Unlimited!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
The 2 parts are printed standing upright on the rear/back face without the need for supports.
(I did enable supports to have nicely rounded screw holes but not essential).
You can mount them using 3 wood screws or double sided tape. The geometry is designed to guide the mouse in for easy storage (This is what appealed to me from the original author, s.e.b.)
The maximum mouse height I found to is 54mm, length (depth) is 130mm, and the width is what ever you need by spacing the brackets accordingly. I'm using it with a Logitech M720 mouse with plenty of spare room all round.
Use the spacing between the brackets to remove your mouse from the bracket using your finger(s).
Need one for you keyboard?