Conveyor Belt Fidget | Satisfying Hand Roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable snap-together conveyor belt fidget
- Ocena
- 0 / 5
- Polubienia
- 172
- Pobrania
- 270
- Wydruki
- 1
- Wyświetlenia
- 2221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
About
This handheld chain conveyor belt fidget uses a satisfying snap together design, with no external hardware needed! It also requires no support, and can be fully printed on single material machines like my own.
Print Settings
0.4mm nozzle is fine
Though mine are PLA, I reccomend PETG as it is less prone to snapping the belt connections during assembly, as PETG is much more flexible
Any layer height will do, but for the outer casing I reccomend smaller layers to make it feel smoother
Assembly Instructions
PLA CONNECTIONS |
|---|
snap them together from the top to mitigate the joint breaking open |
|---|
PETG CONNECTIONS |
|---|
snap them together from the side, the "easy segment" pieces have a slightly easier fit this way but may come apart more easily as well. |
|---|
Make A Loop |
|---|
Large - 19 segments | Small - 16 Segments |
|---|
Insert the Insert |
|---|
If you are making the Two Side version, add the cap to this and you are done! |
|---|
Slide in the Insert |
|---|
Add two 1.75mm Filament Pins (standard size) |
|---|
You're Done! |
|---|
Thanks so much! |
|---|