Creality K2 Plus Ironing Calibration Test (10–30% Flow / 10–30 mm/s) – Smooth Top Layer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fast and effective ironing calibration test designed to help you achieve smooth, consistent top surfaces.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 182
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort.
The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you identify the best combination for your printer and filament.
Circular test shapes were chosen because most prints are not perfect squares. If your settings perform well on curves, they will translate reliably to edges and flat surfaces.
Slicer Compatibility:
This download includes both OrcaSlicer and Creality Print project files.
Each file is clearly labeled, allowing you to use the version that matches your preferred slicer. Both versions use per-object settings for accurate and consistent calibration.
Recommended Workflow:
Calibrate top layer line width first, then use this test to fine-tune ironing performance.