Creality SparkX i7 Ironing Calibration Test (10–30% Flow / 10–30 mm/s) – Smooth Top Layer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fast and effective ironing calibration test designed to help you achieve smooth, consistent top surfaces.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — NoDerivatives
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort.
The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you dial in the optimal settings.
Circular test shapes were chosen because most prints include curves and organic geometry. If your settings perform well on curves, they will translate reliably to edges and flat surfaces.
Slicer Compatibility:
This version was created using Creality Print and utilizes per-object settings for accurate calibration.
Recommended Workflow:
Calibrate your top layer line width first, then refine ironing settings using this test.