Prusa Core One Ironing Calibration Test (10–30% Flow / 10–30 mm/s) – Smooth Top Layer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fast and effective ironing calibration test designed to help you achieve smooth, consistent top surfaces.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 265
- Wydruki
- 0
- Wyświetlenia
- 636
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — NoDerivatives
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort.
The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you quickly find the best combination for your printer and filament.
Circular test shapes were chosen instead of squares because most real-world prints include curves and complex geometry. If your settings perform well on curves, they will translate reliably to edges and flat surfaces.
Slicer Compatibility:
This version was created using OrcaSlicer and uses per-object settings for accurate calibration.
Recommended Workflow:
Calibrate your top layer line width first, then use this test to refine ironing for the smoothest possible surface finish.