Faucet Mounted Floating Soap Dish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Space-saving soap dish for 22mm faucet necks and 65mm flanges. Minimalist design drips directly into the sink.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
This is a minimalist, space-saving soap dish designed for a neat, "zero-footprint" bathroom setup. Instead of taking up valuable counter space, it hangs discreetly on the neck of a wall-mounted faucet, allowing any excess water to drip directly into the sink basin.
This model is a custom design, intended to fit specific faucet and mounting dimensions:
Faucet Neck Diameter: 22mm
Wall Escutcheon/Flange Diameter: 65mm (This is the large, round cover plate against the wall).
Printing & Orientation Notes
Orientation: The model should be printed sitting on its flat surface that will go against the wall.
Supports:
You will need support for the internal arches, the overhang of the central shelf where the soap sits, and the main curved top that hooks over the faucet.
Organic supports are highly recommended. Organic supports efficiently hold the internal overhangs while remaining much easier to detach.
Filament: No constraint. I used matte pastel rainbow PLA.
Note: Since faucet dimensions vary greatly, please ensure your setup matches the 22mm/65mm specifications. If you like the design but the diameters don't match your faucet, please reach out in the comments.