M5 SHCS Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple, quick to print knob to press on to the head of a M5 Socket Head Cap Screw (SHCS).
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 367
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a simple, quick to print knob to press on to the head of a M5 Socket Head Cap Screw (SHCS).
It's intended to be a press-fit onto the screw. I used a vise to press it on to the screw immediately after printing while the part was still warm and a bit soft.
Solidworks file included for remixing.
Print instructions
Unassociated tags: socket head cap screw
Category: DIY Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 30%
Filament: Prusa PLA Black
Notes:
I used PLA because it was handy. PLA tends to be brittle, but since it was still warm I could press it on without cracking the part. PETG, ABS or nylon might be best.