M5 SHCS Knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple, quick to print knob to press on to the head of a M5 Socket Head Cap Screw (SHCS).
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 97
- Makes
- 1
- Views
- 367
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This is a simple, quick to print knob to press on to the head of a M5 Socket Head Cap Screw (SHCS).
It's intended to be a press-fit onto the screw. I used a vise to press it on to the screw immediately after printing while the part was still warm and a bit soft.
Solidworks file included for remixing.
Print instructions
Unassociated tags: socket head cap screw
Category: DIY Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 30%
Filament: Prusa PLA Black
Notes:
I used PLA because it was handy. PLA tends to be brittle, but since it was still warm I could press it on without cracking the part. PETG, ABS or nylon might be best.