Beach Anchor Screw Cap (BeneLabel)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved safety cap for screw sand anchor with storage clip. Designed for TPU.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I purchased a sand anchor spike screw on Amazon, but the rubber cap was so thin, it was basically unusable for safety on the spike. There was also no way to store it on the spike so it doesn't get lost. The model this is for is the "BeneLabel 17" 26" 36" Boat Sand Anchor for Boat Screw in Boat Anchor".
There are two models, one is with the storage clip, and one is just a basic direct replacement. Designed to be printed with TPU with the opening on the plate.
Print settings with clip:
Layer height: 0.20mm. Walls: 5. Supports: None. Infill: 25% gyroid, then height-range modifier 50mm-60mm 100% rectilinear.
Print settings without clip:
Layer height: 0.20mm. Walls: 5. Supports: None. Infill: 100% rectilinear.
Printed on AnyCubic Kobra S1. Modeled with OnShape.