Lens Cover for RASA 8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This telescope cover is tested and designed for the RASA 8 inch telescope.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- GNU General Public License v2.0
This telescope cover is tested and designed for the RASA 8 inch telescope.
This can be printed on smaller beds by angling the part and using supports. Due to the size, the Ender 3 needs to have the part at an angle; the CR-10 can print the part laying flat.
Non-volatile, UV/heat resistant plastic should be used to prevent offgassing onto the lens. PETG is an excellent choice for this.
Designed with a .2 mm layer height in mind, and a .4mm nozzle.
A watermark-free version can be downloaded from my Github.
Print Settings
Supports:
No
Infill:
15%
Filament: Hatchbox PETG
Category: Physics & Astronomy