LayersFactory
Zgłoś model
1 / 14
Compact Cable Reel Set for 0.5m-2m Cables — zdjęcie 1
1 / 14

Compact Cable Reel Set for 0.5m-2m Cables

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

bod_3d

bod_3d

@bod_3d

A 3D-printed cable reel set organizing and protecting cables from 0.5 m to 2 m, tangle-free in storage or transport.

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
118
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (2)Powiązane

Description A compact 3D-printed cable reel set that neatly organizes and protects cables from 0.5 m to 2 m in length, keeping them tangle-free during storage or transport. The set includes four optimized sizes (0.5 m, 1 m, 1.5 m, 2 m) for phone chargers, USB cables, Lightning, and other small electronic cords.

Why This Model? Unlike single-size reels or loose ties, this set provides purpose-built spools for each common cable length, ensuring a snug, kink-free coil every time.

Features

  • Includes 4 optimized sizes: 0.5 m, 1 m, 1.5 m, and 2 m.

  • Secure snap-fit locking system.

  • Compact and portable design.

  • Easy to print, no supports required.

  • Helps protect cables and extend their lifespan.

  • Zero hardware required — print and snap together.

  • Print-farm friendly: all parts orient flat without supports.

Technical Specifications

  • Cable Length Compatibility: 0.5 m, 1 m, 1.5 m, 2 m

  • Construction: Two interlocking parts per size (main reel + protective cover)

  • Locking Mechanism: Built-in snap-fit clips

  • Use Case: Phone chargers, USB cables, Lightning cables, small electronic cords

How to Assemble

  1. Wind the cable neatly onto the main reel of the matching size.

  2. Place the protective cover over the reel, aligning the snap-fit clips.

  3. Press the cover down until the clips engage and the assembly holds the cable firmly.

Recommended Print Settings

  • Material: PLA

  • Layer Height: 0.2 mm

  • Infill: 15–20% (Grid or Gyroid)

  • Supports: Not Required

  • Walls: 3–4 wall loops

Usage & Tips

  • Print in PETG for slightly more flexible clip engagement if you frequently re-wind cables.

  • Leave a small length of cable sticking out of the reel's opening for faster unwinding in daily use.

  • Store the set in a small pouch or drawer to keep all sizes together.

Support Block

💖 Enjoyed this print? All my models here are completely free for personal use. If you like my design and want to show your appreciation — or help me buy more filament for testing new projects — you can support my work by purchasing this model on Cults3D: https://cults3d.com/:3911739

Commercial License Block

💵 Commercial License & STEP Files: If you want to legally sell physical 3D-printed copies of this model, you can purchase the Commercial License and get editable STEP files on Cults3D here: https://cults3d.com/:4961353

Tagi

makerspoolorganizerholdercableprinteddiystorageprintinplacechargerphonechargingsnapfitusbcompactlightningspinningportabletraveledcwinder3dprintusbcablefunctionalprintcableorganizereverydaycarrycablestoragetwopartcablereelset