Rescue Your Glue! - Hobby Lobby / Adhesive Guru 4.5oz Emergency Nozzle & Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A professional 2-piece replacement set for 4.5oz Adhesive Guru (Hobby Lobby)
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Summary
A professional 2-piece replacement set for 4.5oz Adhesive Guru (Hobby Lobby) CA glue bottles. Designed to rescue full bottles when the original nozzle clogs. Engineered for easy printing and perfect fit.
Don't throw away that full bottle of glue!
We’ve all been there: you reach for your CA glue and the tip is a solid block of plastic or the cap is fused shut. This 3D printed set is a precision-engineered rescue kit for the common 4.5oz bottles found at Hobby Lobby.
Advanced Design Features:
Print-Optimized Threads: Unlike other designs, these threads are engineered to fit perfectly even at 0.20mm layer height. No more struggling with tight or stripped threads.
Two-Piece System: Includes a threaded precision nozzle and a Press-Fit (Friction Fit) outer cap for quick access and a clean seal.
Ultra Efficient: Uses only 8g of filament and prints in under 30 minutes.
Print Instructions
Material: PETG (Highly recommended for chemical resistance and flexibility).
Layer Height: 0.20mm (Optimized for this height).
Walls/Perimeters: 3.
Infill: 10% Rectilinear.
Supports: Organic/Tree supports for internal overhangs only.
Bridge Settings: Ensure "Bridge counterbore holes"
BEFORE

AFTER
