RAK5005 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We've all been there, excitingly powering on your arduino with the program you just coded. Only for the arduino to release the magic smoke because a solder ball or a metal object on your workbench shorted it.
This skirt helps to prevent these types of scenario's for the Wisblock Base Board (RAK5005).
Print settings
Layer height: 0.1-0.3
Infill: 100%
Supports: No
Brim: Recommended if you have problems with bed adhesion (also looks pretty good (see pics))
This model is made with a tolerance of 0.3mm in mind, if your printer cannot achieve this tolerance, it's advised to scale the model up by a percent or 2.
On the contrary, if your machine is really precise, it might make sense to scale down the model in the X and/or Y direction.