RAK5005 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RAK5005 skirt to prevent shorts and contaminants.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 108
- Makes
- 0
- Views
- 943
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
We've all been there, excitingly powering on your arduino with the program you just coded. Only for the arduino to release the magic smoke because a solder ball or a metal object on your workbench shorted it.
This skirt helps to prevent these types of scenario's for the Wisblock Base Board (RAK5005).
Print settings
Layer height: 0.1-0.3
Infill: 100%
Supports: No
Brim: Recommended if you have problems with bed adhesion (also looks pretty good (see pics))
This model is made with a tolerance of 0.3mm in mind, if your printer cannot achieve this tolerance, it's advised to scale the model up by a percent or 2.
On the contrary, if your machine is really precise, it might make sense to scale down the model in the X and/or Y direction.