Counting matching models…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…
The side up orientation should help a little with strength and you shouldn't have any issues printing this as you would with any other model without adding further supports in slicer. Credit to…
A case for the awesome and affordable DPS5005 Power Supply: https://www.banggood.com/RD-DPS5005-50V-5A-Communication-Function-Constant-Voltage-Current-Step-down-Power-Supply-Module-p-1161704.html?p=2@3021069489201207MV It has support for…
Summary This is a case for RAKwireless RAK19007 and RAK5005 base boards with an N-type antenna. My goal was to create a thinner case to accommodate an N-type antenna connector. The current design works but could be improved, for example a…
Ursprüngliche Idee war die mobile Stromversorgung meines TS101 Lötkolbens mittels 18V LXT-Maikta-Akkus, wovon ich mehrere besitze. Geendet ist das ganze dann in diesem Projekt. Ein mobiles Laborletzteil mit mehreren Spannungsausgängen und…
I liked the original design by @nrp and the remix by @Nitek (thingiverse) but I also wanted some of the features seen on other versions of the power supply case such as: DC barrel jack input Tilt the front panel up to make the display…
The film door latch on the Nikon N6006, N5005, and N4004 (F-601, F-401X, F-401) is notorious for breaking. Replacements are often over $10 for a piece smaller than a fingernail, so I modeled one and want to release it for free! This…
A 3d printed case for the popular DPS5005 running OpenDPS. I CNCed the side panels from a 1/8in acrylic panel. You can also 3d print them if you want. Follow the Datasheets to get the correct connector housings and terminals to interface…
Remixed the CoolDPS case. Change log: Customize Boost converter support to use the 150w boost converter I had laying around. Add more vents above boost converter. Change front and back panel to use DC jacks and Anderson powerpoles (I have…
This model is a remix of https://www.thingiverse.com/thing:2975884/remixes It has an improved ventilation holes on the back because the last model suffocated. I have also removed the banana connectors on the output and left only the…
Object: Hairdryer Model/type: Remington Remington D-5005 Part: Impeller. Description: my wife's hairdryer stopped working due to broken rotor blades so I had to ;D print new impeller. I upgraded impeller to increase overall endurance -…
WZ5005 power supply box. If you are unfamiliar with the mains supply voltage, consult a qualified electrician. Both power supplies are Meanwell LRS-100-24 adjusted to 27v. connected in series a total of 54v. A choke filter can optionally…
Look ma, no overhangs! I love the original model, but it was missing a few design elements which make printing a lot easier - so here's my take! All STL files require no supports, and are pre-orientateded. Highly recommend turning on…
We've all been there, excitingly powering on your arduino with the program you just coded. Only for the arduino to release the magic smoke because a solder ball or a metal object on your workbench shorted it. This skirt helps to prevent…
A tiny, portable adjustable power supply based on the DPS5005 power supply module. Input power is provided by a USB PD trigger module. I used this one in the “High Voltage” variant which can go up to 48V with USB PD 3.1. I suggest…
This is my interpretation of what a DPS5005 case should look like. I wanted a smaller case than was typically available. Although you need to print this with supports, they are very easily removed. Print the models the way they are…
I modified to PSU Case to fit a cheap USB-C power delivery decoy module like https://www.aliexpress.com/item/4001253821461.html with a DPS3005 and it's USB-Controll-Module (e.g. https://s.click.aliexpress.com/e/_AmyMWd ). Build is…
Power supply using two DPS5005 units, and a 48V DC power supply unit. It requires a handful of other components that you can easily get from a local electronics store or on line (binding posts, power inlet etc) The PSU is an S-500-48.…
Housing that is just big enough to fit an old laptop power supply and the DPS5005 . The laptop power supply can only output 18V / 3.25A, for my normal electronic projects that is plenty enough. I Have a 50V/5V version, but the main…
Modified 3D model that allows adding a fan for better cooling. Due to the use of the power module RK6006 with bluetooth, the possibility to add a USB module for communication was removed, which in turn made it possible to add a 3006 Axial…
My version of a DPH5005 case. It is done in OpenScad so it is easily modified. All connections are in the front and rear panels.This has a 4 jack powerpole input on rear. The top two inputs are used as an on/standby. I use an old XBOX 12V…
This is my first design of a bench power supply base on a DPS5005 and a 36V 5A Power Supply Module. Update: 03.10.2022 I have added a V2 Version of the two part. They are much stronger and the fitting of the power plug screws is better…
This is an enclosure for a DPS5005 voltage converter with Bluetooth and supply board 230V AC to 36V DC. For higher load of the DPS a fan 60x60x15mm was installed, but I also provided a cover without fan. The fan cover is for the inside,…
Overview: A 48V AC to DC power supply supplies the DPS5005 module with power. The module outputs via the two binding posts below it. An additional 5V power supply outputs 5V via two USB A connectors (this PSU is housed inside a small 3D…
This is the front and back panels for the factory-made case Kradex Z4AJ . Sorry, I don't have top and bottom parts, you can buy the case if it is available in your region (Europe probably) and replace the front and back panels with…
This is a somewhat parametric tilt stand for a DPS5005 power supply case like this one: https://www.amazon.de/gp/product/B077NZF6DZ The included STL has a 17° angle, and 15 mm extra vertical lift, which is perfect for my case. The…
Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB. I used M3 injection nuts to fix the back cover and safety banana sockets to be able to use multimeter probes. On the backside is a DC power socket . The M3…
TiltBox for DPS5005 Simple and functional enclosure for the DPS5005 variable power supply, designed to make it easier to use and look good on your workspace. Features Angled Display : The DPS5005 module is tilted for better visibility and…
Simple box to hold a DPS5005 (link here: DPS5005 ) on a DIN rail. I mounted all my tool holders and stuff with a DIN rail on the underside of a custom made bench, so I needed something to hold everything on it. The banana connector used…
Just an easy to print model with snap fits for the usb and psu module.
I designed two halves of a power-supply cover for the DPS5005 and DPS5020 from Ruideng (RIDEN, RD TECH) which fits perfectly with the 200W, 48V switching powersupply from Velika. As powerswitch, I am using an Inlet Combi-Module C14 with a…
This case holds the power supply at an angle for desktop use. There is a spot on the back for an XT60 connector for the power input. There are two holes on the front for banana screw terminals for the power output. There is a spot in the…
I really liked the fastener less remix of this case from Morris Lazootin, but mostly use XT60 plugs and connectors for all my battery packs and lab equipment. So i removed the holes and support for the USB PD decoy of the rear plate and…
This project was on my backlog for a while…. It's cute little bench PSU with main goal being powering some electronics projects, dev. MCU boards and other low voltage stuff. I had x1 DPS5005 laying around, but wanted at least x2 channel,…
POCKET SIZE 3D PRINTED ENCLOSURE Enclosure was design for DP modules like DPS5005, DPS3003 The ones without additional board. I decided to add small fan, but the board dont requaire one, so this is optional. As you seen on pictures, I…
Just my design of a DPS5005 Case with Fusion360. Inspired by thing:3472791 but fully redrawn. Category: Tool Holders & Boxes
This is a pegboard mounted power supply using a DPS5005 power supply module. This is designed to be as compact as possible, so you don't have a ton of room to work inside. You should wire everything up before you put the module in, since…
Module case for several power supply modules (DPS5005 / XYS3580….) There a two version (with or without space for external power supply). Version1: Bottom_Part_placeholder.stl + Upper_Part.stl An old power supply (e.g. from and old…
I designed this little power supply case for my DSP5005 in style of a mini laboratory power supply. It works really nice with an old notebook power supply. If you need more space you can print the extension too. Both, the body and the…
Simple but powerful laboratory power supply from two DPS5005 modules and 47V industrial LED power sources. 2019-01-18 Added modification for single DPS (vertical and angled variant) Print Settings Printer: Molestock Rafts: No Supports: No…
Main DPS unit: DPS3005, DPS5005 Female banana connectors: standard ones should fit OK Speaker spring connectors: standard double pole version 5521 DC jack: again, standard ones that look like this (approx. 9mm x 11mm x 14mm)
I have the same power supplies but 6.3A each. They are longer than in original design. I've created elongated version for the back part. Also I've put different type of switch and plug as well as place for the fan 3010.
I made yet another DPS 5005 box. Tried to make it small. Uses an HP/DELL power connector. You can find it on Aliexpress for few bucks for 10pcs. The wires from the connector have to go directly to the back, flat with the bottom of…
I wanted to have a compact case for my DPS5005 Lab Bench Supply powered by a Meanwell RSP-200-48. the halfes can get screwed together, but for stationary use the friction fit is sufficient. It also features litte balls as feet, and…
Dust cover for the user button on the TonyG RAK19007/RAK5005-case. The fit is pretty tight, so I ended up putting the button inside the dust cover before putting the assembly into the hole in the case. Print this in some soft TPU, install…
I remixed the original backpanel to accommodate a female XT60 connector, so that I could use the DPS5005-based PSU with https://www.printables.com/model/322597-lrs-200-power-sleeve that I have built quite some time ago as a universal…
This remix contains files for using the MyActuator RMD L5005 CAN motor, 10mm panel mount switches (longer space behind the switches), a trigger to use ALPS RK09D117000C potentiometers. The handle must be mounted using a 603 bearing and M3…
A case for the DPS5005 USB C Adjustable Power Supply to safely carry it around in your backpack or similar. Print in medium to hard TPU (I used 95A) so the case is slightly flexible but still robust and provides impact protection. The fit…
Einfaches und schnell druckbares Gehäuse für das DPS 5005 auf Basis des Modells von zsoltm. BOM: 1 pcs DPS 5005 4 pcs 3x8mm selbstfurchende Gewindeschrauben 4 pcs Bananenbuchse 4mm
Remix of a DPS 5005 Case. Added DC Connector with 11mm diameter. Added cutout for USB Controlboard. Case is 30mm longer.
This is a compact benchtop power supply case for the popular DPS5005 and other DC/DC controllers in that family. It also provides the ability to mount it to IKEA SKADIS above your bench to free up space. I am powering this DPS from a 19V…
Here is my protective cover designed with ventilation holes for iPistBit 5'' Raspberry Pi Monitor Touchscreen Monitor 1024*600 HDMI IPS Capacitive Screen for Raspberry Pi 5 4 3 2 Driver-Free also : 5inch HDMI Display-C. Also featuring…
@BigTuna_3247047 did a great job making this file. I remixed it to work with the Rak19007/5005. Works great.
Сompact сase for DPS module 5005 or 3606 includes AC-DC power supply, DPS modul and 3 types of output interface XT-60, DC 5.5-2.5, DC-jack. Model containing maine body and cover For assy need: Screw M3*6 x4 Insert's M3 x4 DC 5.5-2.5…
This is a basic bobbin holder for a Privileg Super Nutzstich 5005 . It fits into the tray in front of the sewing area and can hold 8 bobbins.
This is a dps5005 based power supply with integrated 36v 3A Delta power brick and a 30mm fan. It probably does not fit for you but i include a fusion360 project file. Usb connection is also supported and the cooling is good enough for…
Description A tiny, reliable and cheap power supply based on the DPS5005. The backplate also features a space for the USB Expansion Module. The input supply of the powersupply is done via USB-PD Trigger module. Parts A list of needed…
Deutsch: Remix von: https://www.thingiverse.com/thing:2951395 Ich habe es bearbeitet für Rechteckige Kippschalter: (19,2x12,4)…
Parts and Features This is a box to mount a DPS5005 Buck Converter Variable DC Regulated Power Supply. It includes two 50mm spaced M6 or 1/4-20 clearance holes at the bottom for mounting to an optical breadboard or table. The model I used…
Just an easy to print model with snap fits for the usb and psu module.
Einfaches und schnell druckbares Gehäuse für das DPS 5005 auf Basis des Modells von zsoltm. BOM: 1 pcs DPS 5005 4 pcs 3x8mm selbstfurchende Gewindeschrauben 4 pcs Bananenbuchse 4mm
This is a compact benchtop power supply case for the popular DPS5005 and other DC/DC controllers in that family. It also provides the ability to mount it to IKEA SKADIS above your bench to free up space. I am powering this DPS from a 19V…
This model simply makes the OG body printable in place, and adds ventilation holes. Click HERE to download the new model, which features a completely re-designed leg system, adds features and fixes issues + is now is completely print in…
https://www.aliexpress.com/item/32873386670.html https://www.aliexpress.com/item/1005005377450303.html https://www.aliexpress.com/item/1005007294120763.html https://www.aliexpress.com/item/1005004493690896.html…
This model is compatible with the lego system.
I designed this case to house both the DPH-5005 as well as a laptop power supply. Thanks for Looking! Parts List: DPH5005-USB ASUS Laptop Power Supply Model A15-120P1A Power socket with rocker switch 15A (From Amazon ) M3 Button Head…
This is hook for Lego Minifigure Frame Skechup file included Category: Toys & Games
congratulations to "myang777" for the outstanding design of his DPS enclosue - DPS fits great and very easy to print. The only thing a changed was a XT60 Plug in the back, in order to power the DPS with LiPO battery (and other stuff).…
Didn't find a case that I liked for the XY5005E/XY5008E type of power supply, so I made one. You will need: a panel mount DC barrel jack (5.5x2.1 mm kind) 1x XL601 switch (the very common black one) 1x XT60E-M connector 1x XT60E-F…
