1 / 4
DPS3005 / DPS5005 Bench Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 58
- Makes
- 0
- Views
- 701
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB. I used M3 injection nuts to fix the back cover and safety banana sockets to be able to use multimeter probes.
On the backside is a DC power socket.
The M3 bolds to fix the USB inteface board are difficult to mount. I used a soldering iron to meld them into the plastic.
Print orientation is the same as shown above in the rendered pictures.
Feel free to share your prints.