1 / 4
Boot, Cover for Milwaukee 2557 M12 3/8" Ratchet.  Versions for both TPU and Hard Filaments — zdjęcie 1
1 / 4

Boot, Cover for Milwaukee 2557 M12 3/8" Ratchet. Versions for both TPU and Hard Filaments

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protective cover for the head of the Milwaukee 2557 M12 3/8" Ratchet. Versions for both TPU and Hard Filaments

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
104
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a protective cover for the head of the Milwaukee 2557 M12 3/8" Ratchet. I have designed two versions.  One is exclusively for TPU and uses a printed "key" for closure.  Version 2 may be printed in any "hard" filament or TPU.  It uses a zip tie for closure.  I tested V2 using Creality PETG.  I do not know if PLA will have enough flex to install.

I printed the cover, both versions, upright on the build plate with 15% gyroid infill and tree supports.  The "key" for V1 was printed at 30% infill.  The key should also work with V2 if cover is printed in TPU, otherwise a zip tie for closure will be the order of the day.

Tagi