Boot, Cover for Milwaukee 2557 M12 3/8" Ratchet. Versions for both TPU and Hard Filaments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protective cover for the head of the Milwaukee 2557 M12 3/8" Ratchet. Versions for both TPU and Hard Filaments
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a protective cover for the head of the Milwaukee 2557 M12 3/8" Ratchet. I have designed two versions. One is exclusively for TPU and uses a printed "key" for closure. Version 2 may be printed in any "hard" filament or TPU. It uses a zip tie for closure. I tested V2 using Creality PETG. I do not know if PLA will have enough flex to install.
I printed the cover, both versions, upright on the build plate with 15% gyroid infill and tree supports. The "key" for V1 was printed at 30% infill. The key should also work with V2 if cover is printed in TPU, otherwise a zip tie for closure will be the order of the day.