Snapmaker U1 Lid Pegs - Easy Mount for IKEA Samla
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple corner pegs -- minimalist mount for IKEA Samla 45L bin as top cover on the Snapmaker U1 printer.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 98
- Wydruki
- 3
- Wyświetlenia
- 740
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- BSD License
Remove the factory silicone plugs and replace them with these four pegs, positioning their protrusions toward the printer’s centerline. Then place an inverted Samla 45L bin ($7 at IKEA) on top.
Voilà ! With that cover and this five-gram low-profile mount, your Snapmaker U1 is now sufficiently enclosed to retain the heat necessary to print with high-temperature materials like polycarbonate without the warping that comes from cooling too quickly.
This works well for me, resulting in a passively heated chamber of up to 54°C on a 16°C day. Tape over a portion of the vent at the rear if you need to retain even more heat.