Snapmaker U1 Lid Pegs - Easy Mount for IKEA Samla
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple corner pegs -- minimalist mount for IKEA Samla 45L bin as top cover on the Snapmaker U1 printer.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 98
- Makes
- 3
- Views
- 740
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- BSD License
Remove the factory silicone plugs and replace them with these four pegs, positioning their protrusions toward the printer’s centerline. Then place an inverted Samla 45L bin ($7 at IKEA) on top.
Voilà ! With that cover and this five-gram low-profile mount, your Snapmaker U1 is now sufficiently enclosed to retain the heat necessary to print with high-temperature materials like polycarbonate without the warping that comes from cooling too quickly.
This works well for me, resulting in a passively heated chamber of up to 54°C on a 16°C day. Tape over a portion of the vent at the rear if you need to retain even more heat.