Niimbot Label Holders for Multiboard | 25x15, 40x30, 50x70
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Niimbot label holders designed for the Multiboard system, available in 3 sizes for 25x15, 40x30, and 50x70 lables
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
These are custom Niimbot label holders for the Multiboard system, designed to keep label rolls neatly stored, easy to access, and clearly visible on your board.
The holders are made to suit the following label sizes:
25x15
40x30
50x70
This makes them a practical storage solution for workshops, storage walls, maker spaces, tool stations, and general organization setups using Multiboard.
Each holder mounts into the Multiboard system and is sized to fit the matching Niimbot label roll securely. The design keeps your labels organized while making it easy to swap between sizes as needed.
Material / Printing
These holders can be printed in basically any material, so you can use whatever works best for your setup.
Supports
Only the connector section that attaches to the Multiboard requires support on the holder
Features
Designed specifically for the Multiboard system
Compatible with Niimbot label rolls
Available in 3 label sizes
Clean and compact wall-mounted organization
Easy access to commonly used labels
If this design helped you and you’d like to support future projects, you can buy me a coffee at
https://ko-fi.com/cyberpunkengineer